Mick

Michael Benwick - Former London Cabbie (Taxi Driver) in the 90's and 2000's, retired in 2011. Now spend much of my time researching and marketing Car Cameras, Dash Cams and related products, for drivers who look out for others on the road as much as they look out for themselves.

Car Dash Cams For Security

Car Security Stickers

 

Dashboard cameras are able to aid Law Enforcement Officers with actual footage of what really happened prior to, during, and even after an incident. Dashboard cameras have also been able to capture natural disasters like tornadoes, hail, lightning strikes and hurricane force winds….  

It’s difficult to see how a dashboard camera can be a bad thing, because it doesn’t require the driver to do anything that would distract them while driving.  They just have to turn it on and start recording at the beginning of their journey.

Some insurers offer lower premiums for drivers who have Dash Cams because they can provide a definitive version of how a collision occurred, or even a theft from the vehicle, saving costly and uncertain litigation to determine what actually happened.

Dash Cams don’t just record video while you are driving.  If you have one powered by a battery, you can also record what happens around your vehicle when it is parked.  Another way to use Car Dash Cams For Security.

 

A demonstration of the Cellink B, a 12V battery pack that will keep your dash-cam running even when your engine isn’t.

(Video: TechMoan)

See More…“Car Dash Cams For Security” »

Installing A Wireless Rear View Car Back-Up Camera

Rear View Car Back-Up Camera Systems can be either cabled or wireless, depending on the model (The Camera not the car!).  The Wireless option can be very simple to install.

 

Installing a Wireless Monitor & Rear View Back-Up Camera System for your car

 

In the example video below we are installing a Back-Up Camera System, Model ACA250, which is a Wireless monitor and rear view camera system for backing up your car, but the same steps are commonly used for most Back-Up Camera Systems.

Installing a Wireless Colour Monitor & Back-Up Camera System

 

How to install a Wireless Backup Camera with monitor: 

Car Camera, Monitor and Power Source

1.   Take off your license plate at the back of your car.

2.   Remove the car’s Reverse Tail Light so as to access the backup lamp wires.

3.   Connect the camera’s power leads to the reverse light of your car to get the power – red wire for positive and black wire for negative.

4.   Connect the power cable leads running from the Reverse Light, or ‘tail light’ to your camera, via the trunk to behind  the License Plate.

5.   Put back the Tail light and the License Plate.

6.   Fix the camera’s bracket to the license plate where the bottom two screws are situated, using those screw holes to fix it in.

7.   Position the Monitor on the front dashboard of the car or wherever you decide to put it, making sure that it will not block your view while driving.
See More…“Installing A Wireless Rear View Car Back-Up Camera” »

ItsHere4u.info 2024